HP LaserJet M14-M17 or M28-M31 Printer for an Android Wireless Network | HP Printers | HP
Learn how to set up an HP LaserJet M14-M17 or M28-M31 printer on a wireless network from Android.
For other helpful videos go to http://hp.com/supportvideos or http://youtube.com/hpprintersupport.
More support options for your printer are available at http://hp.com/support.
Continue the Conversation:
http://hp.care/SupportForums
http://hp.care/FacebookSupport
http://hp.care/TwitterSupport
Follow these steps to set up an HP LaserJet M14-M17 or M28-M31 printer on a wireless network from Android:
- Disconnect any USB cable.
- Turn on the printer you want to set up, and wait until it is idle and in a ready state.
- On the printer control panel, press and hold the Wireless button for twenty seconds.
- When the Attention and Power lights blink simultaneously, release the Wireless button.
- All printer network settings are restored to factory defaults.
- With the settings restored, the printer restarts automatically.
- On an Android device connected to the network in which you want to connect the printer, go to 123.hp.com.
- Tap Get the App, and then follow the prompts to install HP Smart.
- Open the HP Smart app, tap the check box to agree to the terms, and then tap Start.
- The Welcome screen only appears the first time the app is opened.
- Tap Select a Printer, and then tap Continue.
- The app searches for and detects printers connected to the wireless network and printers that need to be set up.
- If no printer is found or your printer is not in the list of detected printers, tap Set Up a New Printer or Add Printer.
- Otherwise, select your printer model from the list that also has Setup in the name.
- If prompted, enter the password or passphrase for your wireless network, and then tap Continue.
- The app finds the printer, configures it for a wireless connection, and then connects it to the network.
- With the connection complete, tap Continue.
- Check the printer status to verify the connection.
- To print using HP Smart in Android, the HP Print Service Plugin must be installed and enabled.
- If it is not detected in Android, follow the prompts to install the plugin, and then return to HP Smart.
- Continue following the prompts and adjusting any settings to finish setting up the printer in HP Smart.
- With the printer setup complete, try to print from your Android device by tapping Print a Document.
- If you receive any prompts by the plugin or app requesting access to your device or files, always tap Allow.
- Follow the instructions, adjust any desired settings, and then tap Print.
- The document prints over the wireless network on your LaserJet printer.
- The printer is ready for printing and can be set up on other devices.
- To confirm the wireless settings and to assist in setting up other devices, print a Configuration Page from the printer control panel.
- Press and hold the Start Copy or Resume Cancel button.
- When the Ready light blinks, release the button and a Configuration Page prints.
- The Configuration Page displays the settings for your printer, including the IP address which can be used to set up your printer on other devices.
#HP #HPSupport #HPPrinters
SUBSCRIBE: http://bit.ly/PrinterSupport
SHOP NOW: http://store.hp.com/us/en/
About HP:
HP Inc. creates technology that makes life better for everyone everywhere — every person, every organization, and every community around the globe. Through our portfolio of printers, PCs, mobile devices, solutions, and services, we engineer experiences that amaze.
Connect with HP:
Visit HP WEBSITE: http://www.hp.com
Like HP on FACEBOOK: https://www.facebook.com/HP
Follow HP on TWITTER: https://twitter.com/HP
Follow HP on INSTAGRAM: https://www.instagram.com/hp
Follow HP on LINKEDIN: https://www.linkedin.com/company/hp
This video was produced by HP.
HP LaserJet M14-M17 or M28-M31 Printer for an Android Wireless Network | HP Printers | HP
https://www.youtube.com/user/HP
ConversionConversion EmoticonEmoticon